hey , my car does this studder in 3rd and 4th when i give some gas and if i floor it i can feel the power going up and down , so , i tried all the pour in the tank stuff and good gas and i got under the car and all the wires and they look fine and also i replaced all plugs and coils about 6 months ago , but however i did remove my MAF screen for a week but when it started this i put it back in and its been like a week and it still does this but never a ses light....any ideas?? :(
Announcement
Collapse
No announcement yet.
car runs like crap crap crap!
Collapse
X
-
car runs like crap crap crap!
{1995 3.8 A4}{Flowmaster Exhaust}{SLP CAI & Fan Switch}{4 Wheel Disc Brakes}(3.42 LSD}<br /><br />{2004 Dodge Dakota SXT 3.7L SOHC V6}{Cold Air Intake}{Dynomax Ultraflo 2.5\" Catback}<br /><br /> <a href=\"http://members.cardomain.com/95blackbird3800\" target=\"_blank\">http://members.cardomain.com/95blackbird3800</a>Tags: None
-
the wires look fine but i will check again and i reset the pcm so we will see what that does.........anyone else have anything??{1995 3.8 A4}{Flowmaster Exhaust}{SLP CAI & Fan Switch}{4 Wheel Disc Brakes}(3.42 LSD}<br /><br />{2004 Dodge Dakota SXT 3.7L SOHC V6}{Cold Air Intake}{Dynomax Ultraflo 2.5\" Catback}<br /><br /> <a href=\"http://members.cardomain.com/95blackbird3800\" target=\"_blank\">http://members.cardomain.com/95blackbird3800</a>
Comment
-
man this sounds like the classic burnt plug wires problem. I have been there and no I couldn't see where the wires were burnt.
also I noticed that you said you replaced the plugs, when you did this did you use dielectric grease on the wire boots? it's a really good idea to do so, keeps everything insulated and keeps from tearing up your boots when removing the plugs..
honestly man I'd look into getting a new set of wires, the odds of you physically seeing the problem are small..
taylor wires from www.thunderracing.com are an excellent choice.. go to autozone and buy a tube of dielectric grease (about a buck) and use it on the plug boots, (not a good idea to use on the side that plugs into the coil)
also when you route them be careful and zip ties can come in handy here also..-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:
Comment
-
well i reset the pcm and so far very very good!!!!
thanks to everyone [img]graemlins/fluffy.gif[/img]{1995 3.8 A4}{Flowmaster Exhaust}{SLP CAI & Fan Switch}{4 Wheel Disc Brakes}(3.42 LSD}<br /><br />{2004 Dodge Dakota SXT 3.7L SOHC V6}{Cold Air Intake}{Dynomax Ultraflo 2.5\" Catback}<br /><br /> <a href=\"http://members.cardomain.com/95blackbird3800\" target=\"_blank\">http://members.cardomain.com/95blackbird3800</a>
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago
-
by fishinI usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment