Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
what's a ballpark price to have your heads milled? I had a guy who did all of my work on my last engine, but he passed away so I'm gonna have to take my current engine to a shop...
and loochy, there shouldn't have been enough pressure in your cooling system for coolant to push into the cylinders after only a couple minutes... your thermostat probably never even opened. My guess is that there's some residue that's burning off. If it were me, I would just start it again, and monitor it closely for any noise or rough idling and watch for the smoke to go away. If the smoke continues to get worse, then shut it down and take it in...
You could try checking the plugs and oil for anything amiss, but my guess is it's fine
There is a shop just off of the Sharronville exit on I-275 in Cincinnati. I know how to get there but don't recall the name of the shop or the street. I can find out for you. I had a set of 305 heads milled, ported and polished for $400 cash. That was in '03. Let me know if your interested and I'll see what I can do to locate a number.
sounds good, no funny noises. I need to flush the cooling system and refill. Oil on the dipstick looked normal.
I did feel like it was heating a little too quick...
That video is actually the second time I ran it. By the time the car finished burning off the steam it was hovering just over the 210 mark. It didnt take too long to get there so that made me a little nervous... but I'm still working on bringing the coolant level back up to full. (started by just filling the radiator, but obviously it takes a few fills as it cycles through the system.)
There is a shop just off of the Sharronville exit on I-275 in Cincinnati. I know how to get there but don't recall the name of the shop or the street. I can find out for you. I had a set of 305 heads milled, ported and polished for $400 cash. That was in '03. Let me know if your interested and I'll see what I can do to locate a number.
There's a shop I know of locally that I'm gonna check on, if that doesn't work out I'll let ya know... thanks
Rebuilding the engine... Building a custom front end... T-top conversion... Custom rear hatch..
Custom interior...
Re: Lots of white smoke after head gaskets replaced
Great news. X2 on the system bleeding. Be sure to do it multiple times, and you may even want to check the level in the radiator frequently for the first week or so in the morning when it is cool. Mine needed topped off about 1/4" each day for about a week and now the level is holding steady in the 100+ degree weather we are having.
Also, regarding the 3.8 heads. Both sides are the same head (same casting number, etc.) so the driver's side is interchangeable with the passenger's side. This is why the spark plugs face forward on one side and towards the firewall on the other.
Also, regarding the 3.8 heads. Both sides are the same head (same casting number, etc.) so the driver's side is interchangeable with the passenger's side. This is why the spark plugs face forward on one side and towards the firewall on the other.
Hmmm interesting factoid. I never thought about that but now that you mention it, that would explain it.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment