Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
NGK TR55's $2.00 a plug for N/A engine, and if 87 runs fine without any issues then go for it. I run a 9.8:1 compression right now with a cam , so I like to run the highest I can get at the pump which is 91 OCT. My next build going in this FRI. I hope will be like a 9.9:1 compression.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
I would just run the lowest octane that provides knock-free performance. Back in the day when I had my other car, I ran 92 in it for years until I read that it made no difference. So I tried 87 and got an immediate good increase in mlieage. Which showed me that the engine liked 87 because it was tuned for it. So I think it's best to use what is recommended for your engine, unless you have mods that require higher octane.
Others on here are correct in that higher octane only means it burns slower, which reduces knock. But if you are running it in a car that is tuned for 87, the piston is already on the way down while the mixture is igniting. So, you are wasting that combustion. Hence lower mileage. If your performance is improving, I agree, there are other issues that the higher octance gas is addressing. Which is probably carbon buildup.
I noticed when I run 87 here in CA it runs a bit rough and the acceleration isn't to smooth. I usually use 89 and sometimes 91 when I get her washed. But I do feel the difference at 89.
I noticed when I run 87 here in CA it runs a bit rough and the acceleration isn't to smooth. I usually use 89 and sometimes 91 when I get her washed. But I do feel the difference at 89.
They add O2 to the fuel here in Calif. That's why our rating only goes up to 91. It was 92 5 years ago, but the EPA brought it down.
Rule of thumb. You look at your compression ratio of the vechicle. Ours are almost on the low side 9:1, so an 87 oct. would do just fine. There really is no performance difference if you go to 91. Unless, you live up in the mountains or high elevation where O2 is low.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
4 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment