ok im putting my new engine back in and im having a prob thwee struts wont lien up with the holes in the engine bay one side lines up but the others side want and vise versus i thik its becuase there to much force on the struts so i hade an idea to take them off from the btottom and intsall them into the engine bay and then sit the engine on them and than put the bolts in the k member do you think these would work let me knwo if you have any ides also foranyone that know theres a small hole in the back of the upper intake wtf goes there its really small all the way in the back on the top thanks
Announcement
Collapse
No announcement yet.
putting engine back in
Collapse
X
-
im afraid if i do that they want go back in its a tight squezze so i was thinking bolting then up from the top first than the bottom once the k member is in and also taking it out from the bottom is not that hard actually pretty easy1999 Firebird 3.8 Chamelon<br /><br />MagnaFlow Catback<br /><br />Devon
Comment
-
um dropping from the bottom is the way it goes nowadays all tech's use this method and for Fbodys its not much of an option.95 Camaro 3.8L Y2K motor <br /><a href=\"http://www.cardomain.com/id/coriya71\" target=\"_blank\">www.cardomain.com/id/coriya71</a>
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago
-
by fishinI usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment