Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I found the source of the leak of fluid. It's where the hose connects to the metal line that attaches to the pump on the best system. Is this user replaceable or do I need to go to a mechanic?
I would say it depends on you're technical prowess and determination. I have not done that specific repair myself, but it looks like a removal of some flare nut fittings and replacement of a $40 part (perhaps less if you're looking to do the repair a couple times). Would need to then refill fluid and perhaps bleed the systems (which isn't hard from what I understand). I'd say if your comfortable working on your car it should be okay.
But as far as specifically what needs to be done I'll wait for someone else to chime in.
If by user-replaceable you mean like replacing the air-filter, then no.
If by user-replaceable you mean something simpler than doing internal engine work, then yes, but you may want to pick up a haynes or chilton's manual.
i had replaced my power steering feed hose which was rubber hose to a metal line and it was pretty darn easy to me...just had a little clearance issues with moving around my wrench but got it eventually..but once you have a manual it should be simple..also this was on a 3.4 motor..
i had replaced my power steering feed hose which was rubber hose to a metal line and it was pretty darn easy to me...just had a little clearance issues with moving around my wrench but got it eventually..but once you have a manual it should be simple..also this was on a 3.4 motor..
From what I can tell, that's where it's leaking from on mine, except on the 3.8. I just don't know what hose to get or how to undo the connection.
well the connections on mine were 2 flare nuts..thats what the ends of the hoses have....one side went to the rack and the other went to the lower rear of the pump..
Yes, its pretty easy to change out, I would watch you pump though, when it leaks it will most likely leak out the back onto the lines , but the pump is easy to change also so I would keep a eye on it.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
From what I can tell, that's where it's leaking from on mine, except on the 3.8. I just don't know what hose to get or how to undo the connection.
As far as what hose to get, get a good one, like Gates or Goodyear or whatever brand it was that came from the factory with. Don't buy some cheap chineese part thinking your saving money. The part's stores usually have the highest markup on the cheap parts, even slapping lifetime warranties even though they are more likely to fail than the more expensive parts with only limited warranties.
If you mean how do you select which part from the ten-million that are in your local parts store? ask the parts store sales person to look up the part for you. If you really needed that answer I would more than highly recommend you purchase a haynes or chilton manual and read the first few chapters a couple times.
you cant just attach a fitting to any hose...this is power steering we are talking about here which means obviously its pressurized.. enzia35 just make sure you have a hose leak for sure..wipe everything and just turn the steering to a hard left and right and see if u can tell where the leak is coming from...if you still cant find which hose just replace both?...there fairly cheap and since your changing one might as well change the other ya know...and seriously buy a manual to help you out...we cant see what your talking about so we cant really help...
i didnt read this thread, so please ignore me if this isnt relevant, but I only read darkflare's post.
it IS possible to connect a rubber line to the metal ones, but you have to flair the end of the metal line and put a hose clamp on it. but DONT try it without the flair or it will pop right off and spray steering fluid all over the place
i didnt read this thread, so please ignore me if this isnt relevant, but I only read darkflare's post.
it IS possible to connect a rubber line to the metal ones, but you have to flair the end of the metal line and put a hose clamp on it. but DONT try it without the flair or it will pop right off and spray steering fluid all over the place
I agree with this idea. I had to create my own transmission line and easily did it using some fuel line, a couple of pieces of pre-flared brake line, and some good clamps. NOT the worm drive clamps. My clamps are like a small version of the T-clamps used for turbo setups. I don't know what the pressure is in transmission cooling lines, but it has been leak-free for well over a year.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment