Manual Seats - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Manual Seats

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Manual Seats

    Is there a way to adjust the height of the manual driver seat in a 4th gen? There is the lever on the side to tilt the seat-back, a lever to scoot the seat forward and back and another level to tilt the seat-bottom.

    I'm 5'8 and don't lean back into my seat, if you put the seat-back all the way forward into the cramped position, mine is set about 2 clicks back. At this adjustment, looking forward, my eyes are slightly above the steering wheel.

    I'm hoping this makes sense...

    My previous '96 Z28 had power seats where the height level could be adjusted, so I never had problems.

    P.S. No telephone book suggestions either..

  • #2
    Re: Manual Seats

    no, they cant.

    im around the same height, but i have no problems seeing over the steering wheel (although i keep my tilt down a little on the 'maro)

    Comment


    • #3
      Re: Manual Seats

      nope there is not, i kinda miss the manuals seats that were in my camaro, this dang power seat in the bird has to many things to set to get comfortable

      Comment


      • #4
        Re: Manual Seats

        Originally posted by venom3300 View Post
        nope there is not, i kinda miss the manuals seats that were in my camaro, this dang power seat in the bird has to many things to set to get comfortable
        Lol, if you have to reset the seat once you get it set you are letting too many people drive your car.

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          2 weeks ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          2 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X