Tweet
Took off the wheel well cover and I found 2 large holes where the water have been sipping thru. This is due to corrosion.
Now would sand papering it and bondo work?
Now would sand papering it and bondo work?
-
-
Re: how do you fix corrosion
That would be a way to cover it, but not eliminate it. Get some pics. If it's surface rust, it's controllable. If it's through the sheet metal, you'd have to replace.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a> -
Re: how do you fix corrosion
Bondo isn't structural - it will just crack and die in an application like this. You'd grind off all the old rust and either weld some sheet metal or maybe some fiberglass mat in there.Drivetrain Moderator - "There are no stupid questions, only stupid people!"
2001 Pewter Firebird Y87, M5
Intake, exhaust, just about every suspension part, alum flywheel & ds, Turn One p/s pump and cooler
Go Sabres!Comment
Comment