Tweet
Is there a right up anywhere for replacing these things
-
-
Re: door pins and bushings
I dont think so, they can be a pain in the ***, gonna need two ppl, or a ladder and some ratchet straps lol -
Re: door pins and bushings
My question is how do u get the spring back into the doorComment
-
Re: door pins and bushings
I just removed the driver door on my dump truck at work and I had to put the spring in a vice and clamp it way down, then I used 2 HEAVY duty zip ties to hold it compressed and when I put it in I had to close the door a little way so the spring wouldn't fly out and kill someone and I just cut the ties.1997 Chevrolet Camaro
L26, Pacesetter headers, SLP cai, Centerforce DF clutch, Pro 5.0 shifter, UMI short stick, 1le driveline, J&M 35mm front swaybar, UMI lca's/phb/sfc's, KYB AGX shocks, Hotchkis stb.Comment
-
Re: door pins and bushings
You can buy a door hinge spring compressor. Look them up online, about $12Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment