Tweet
Replaced the drivers mirror assembly after i mistakenly tore it off backing up. Got new housing with glass mirror but when I drive the glass shakes. Anyone have an idea of how to fix this? Thanks.
-
-
Re: Jittering drivers outside mirror
the glass probably isn't seated in the mirror properly.....if i remember correctly there are studs with balls on them (like me bahahaha) on the housing side that go into that pop into the back of the glass, or maybe its the other way around. -
Re: Jittering drivers outside mirror
so the obvious question is: how do you remove the mirror glass to re-set it without breaking the glass????????Comment
-
Re: Jittering drivers outside mirror
the obvious answer is....very carefully.... well really.....
you are going to just pull on the glass preferably from both sides at the same time. the balls are sitting in plastic and are kind of anchored in, you'll see what i mean once you get it off... but before you take it off. you might want to just tilt the glass al the way to one side and see if you can see whats not connected you might be able to just push it back in.Comment
-
Re: Jittering drivers outside mirror
Thank you bee, I have this same exact problem!Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
Comment