Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Originally posted by MustangEater8251: When was the last time you did some of the routine maintenance?
Plugs, wires, fuel filter,(I assume your air filter is good)
Also are you running the original o2s?
I agree with him. You should get under the hood and give it a good tuneup. Plugs, wires, fuel & air filters, etc.
You shouldn't be accelerating that slow. If a good tuneup doesn't do the trick, tear the TB apart and clean some of that carbon buildup out, then seafoam it.
*if you don't know about seafoam, go to the search section at the top and type it in under the "intake/exhaust" section. You'll get ALL the info you will ever need on it.
I guess these cars just all come out of the factory a little different.
I saw a test in a German car magazine on a 98 A4 convertible with 3.42 rear end. That car took 9.6 s from 0-62 mph.
My car with excact the same set-up takes between 8.3 and 8.5 secs. That is about 8.0 - 8.2 s from 0-60 mph. Quarter mile is about 16.0 s. That is with the stock 193hp Euro set-up.
Horst, <br />2000 Camaro mystic teal convertible,<br />Germany<br />Euro specs incl. 3.45 rear end, restrictive exhaust, Euro rear bumper, Trans Am leather seats
Those times seem slow. I remember Motor Trend did a test on one of the first 3.8 Firebirds in 1995 and it ran 7.1 to 60, with 3.42 and posi. They later ran a 3.8 Camaro without posi and 3.08's and it ran 7.4 seconds. Using a G-Tech, I routinely run 6.8-7.2 to 60. Mine's a Y87 A4 with Whisper Lid, K&N, and take-off Camaro SS exhaust. I agree that some engine work is needed on any car that is running 8 seconds to 60 or more.
1999 Y87 Camaro<br />Whisper Lid, SLP SS Takeoff Exhaust
You can not accuratly time with a stop watch if that is what you were using.
And accurate way is a video camera using a video editing program... lol or possibly a gtech
1997 Chevrolet Camaro<br />5 Speed STD 3.8L V6<br />Mods: !cat, Cherry Bomb Super Turbo muffler<br />15.9@86mph 2.353 60\'@1600ft<br />400,000km
Originally posted by Iwantafbodyagain: You can not accuratly time with a stop watch if that is what you were using.
And accurate way is a video camera using a video editing program... lol or possibly a gtech
That's a good point; no one asked how he got that time. What method did you use to figure out your 0-60 time?
1996 Camaro w/ Y87 package. T-Tops, purple, loaded. Custom painted salad-shooters with Mirage paint.<br /><br />(It\'s my girlfriends car!)
You're right, a G-Tech is not 100% accurate, but it's ballpark. Stop watches are way off. Motor Trend I believe carried out those tests with their radar equipment, also very accurate. I forgot to mention both of those cars were autos, so a 5-speed can get into the 6's stock.
1999 Y87 Camaro<br />Whisper Lid, SLP SS Takeoff Exhaust
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment