Tweet
Any one know if the vent tube for the automatic transmission on an 02 firebird 3.8 is supposed to just be vented to atmosphere or if it's supposed to be routed to a charcoal canister or something similar?
-
-
Re: Vent tube 02 3.8?
Vent tube is on the top of the tranny and hangs down.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: Vent tube 02 3.8?
Mine was connected to the axle vent tube with a "T" fitting, I was just curious if that "T" fitting was supposed to be connected to any thing, seemed strange to have the two connected if they are just going to vent it to atmosphere.Comment
-
Re: Vent tube 02 3.8?
They don't need to be connected to anything.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Vent tube 02 3.8?
It just doesn't seem like a "GM" thing to waste 4 or 5 feet of vacuum line to connect the tranny and the axle vent tubes for no reason.Comment
-
Re: Vent tube 02 3.8?
Any one else with this weird setup on there tranny?Comment
-
Re: Vent tube 02 3.8?
Any one pulled a tranny out lately?Comment
-
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...5 days ago -
Haven’t done anything on the Camaro, but put LEDs on my truck headlights . And my oil pressure sensor went out on the truck so going to fix that this...5 days ago
-
Comment