oil problem - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

oil problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • oil problem

    i have a 96 3.8 camaro and i thought my oil pump was goin out but the mechanic said i have a clog in the oil system. whats the easiest way/cheapest way to fix it???

  • #2
    Re: oil problem

    well wheres the clog? replacing the pump is pretty easy, it's right behind/attached to the front cover...

    2002 SOM Z28 Camaro - 12.9 @ 104 mph
    1996 3800 Camaro - 13.43 @ 100.77 mph


    Project Cars | How To Guides | Scratch Repair | Synthetic Oil

    Comment


    • #3
      Re: oil problem

      I had the same problem need to drop oil pan, clean oil pan because you will have oil build up. No need to change oil pump just clean .
      Camaro V6 1999- K&N Intake System
      - 3.73 gear
      - Jet DST Programer
      - Spark plugs (Split Fire) and wires (Taylor 8.5)
      - Headers (Pace) and Y- Pipe
      - Hi Flow Cat
      :stp:

      Comment


      • #4
        Re: oil problem

        there are solvent solutions. some people don't like them, some people praise them... i would give one a try, you can use seafoam, rosloan? marvel mystery oil etc. but pulling valvecover and oil pan are the best way.

        Comment


        • #5
          Re: oil problem

          Mmmm oil sludge!

          Time to pull the covers and clean her out! Probably have it built up on the oil pickup tube screen too.

          Comment


          • #6
            Re: oil problem

            Try Rislone...I did on my 3.8 and oil pressure is higher longer and little
            fluxuation as before.

            Comment

            Latest Topics

            Collapse

            FORUM SPONSORS

            Collapse
            Working...
            X