Tweet
i have a 96 3.8 camaro and i thought my oil pump was goin out but the mechanic said i have a clog in the oil system. whats the easiest way/cheapest way to fix it???
-
-
Re: oil problem
well wheres the clog? replacing the pump is pretty easy, it's right behind/attached to the front cover...
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic Oil -
Re: oil problem
I had the same problem need to drop oil pan, clean oil pan because you will have oil build up. No need to change oil pump just clean .Camaro V6 1999- K&N Intake System
- 3.73 gear
- Jet DST Programer
- Spark plugs (Split Fire) and wires (Taylor 8.5)
- Headers (Pace) and Y- Pipe
- Hi Flow Cat
:stp:Comment
-
Re: oil problem
there are solvent solutions. some people don't like them, some people praise them... i would give one a try, you can use seafoam, rosloan? marvel mystery oil etc. but pulling valvecover and oil pan are the best way.Comment
-
Re: oil problem
Mmmm oil sludge!
Time to pull the covers and clean her out! Probably have it built up on the oil pickup tube screen too.Comment
-
Re: oil problem
Try Rislone...I did on my 3.8 and oil pressure is higher longer and little
fluxuation as before.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment