Tweet
i have a 96 3.8 camaro. took it to the shop cuz the oil pressure was dropping. the car itles at 30psi then as the car gets warm it would drop to 10psi. but the car ran normal! at first i thought it was the oil pump but it wasnt so they thought there might be a clog so they took it apart and found out the crankshaft bearing was bad so they replaced it and put the car back together. we started the car and it itles at 30psi then as the car gets warm it would drop to 10psi (samething that was happening when i took it in) so i take it home to look everywhere for leaks and on the way home the rockers start clicking. now my friend thinks it could be the piston seals and the motor not getting enough pressure. what do yall think?
-
Last edited by richyrich; 09-03-2012, 05:17 AM. -
Re: oil psi dropped to 0
sounds like a spun bearing -
Re: oil psi dropped to 0
they said it was a carrier bearing?Comment
-
Re: oil psi dropped to 0
Maybe he means cam bearing?Originally posted by thebeewantsboost View Post
Comment
-
Re: oil psi dropped to 0
sorry crankshaft bearingComment
-
Re: oil psi dropped to 0
Bounds like cam bearings to me
And your friend talking about piston seals, is retarded. DO NOT take advice from him.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment