Replacing Gaskets Checklist

[insidethreat07]

As some as you may know I need to replace my upper intake for sure. Im going to do the bottom one as well as long with elbows. Heres everything I have so far:
Fix upper and lower intake gaskets
http://www.autozone.com/autozone/par...6_482003_5297_
http://www.autozone.com/autozone/par...er=148754_0_0_

Cooling Elbows
http://www.autozone.com/autozone/par...7_155956_2826_

Would these elbows be better?
http://shop.zzperformance.com/store/...nt-Elbows.aspx

Would I need a water pump gasket?
http://www.autozone.com/autozone/par...147723_0_5537_

Valve cover gaskets since im taking them off and cleaning/ painting them:
http://www.autozone.com/autozone/par...7183_167769_0_


Also what is the length of our serp belt?
Im getting a new one as well since my old one is starting to crack
http://www.autozone.com/autozone/acc...mString=search

Any other gaskets I would need?

[insidethreat07]

Re: Replacing Gaskets Checklist

UPDATED
Found some of the same stuff even cheaper on rock auto :headbang:
Fix upper intake gasket
Rock auto-FEL-PROPart # MS98014T $49.79
Lower intake gasket $13.99
http://www.autozone.com/autozone/parts/Victor-Reinz-Intake-Plenum-Gasket/2001-Chevrolet-Camaro/_/N-jf8rhZ93yj2?itemIdentifier=148754_0_0_
CoolingElbows $14.99
http://shop.zzperformance.com/store/p/1127-Aluminum-Coolant-Elbows.aspx
ValveCovers gaskets $9.78
Rock Auto - FEL-PRO Part # VS50080R
Water pump gasket $3.63
Rock Auto -VICTOR REINZ Part # K30793
O-Rings $8.99
http://www.autozone.com/autozone/accessories/Help-30-pcs-Assortment-Fuel-Injector-O-Ring/_/N-25hc?itemIdentifier=347152_0_0_
Belt: $13.82
Rock auto - GOODYEARPart # 4060945

[Kenneth]

Re: Replacing Gaskets Checklist

upper intake should be the cheaper one and elbows at advance auto parts are only $4.19. Elbow is the first place I look when I get a coolant leak. :tup:

[insidethreat07]

Re: Replacing Gaskets Checklist

upper intake should be the cheaper one and elbows at advance auto parts are only $4.19. Elbow is the first place I look when I get a coolant leak. :tup:

I have puddles of antifreeze inbetween my fuel injectors

[techsan23]

Re: Replacing Gaskets Checklist

I'd replace the thermostat while you've got it apart. The o-rings that sandwich between the upper and lower plenum usually come with the intake gaskets.

[insidethreat07]

Re: Replacing Gaskets Checklist

Fix upper intake gasket $49.79
Rock auto-FEL-PROPart # MS98014T
Lower intake gasket $13.99
http://www.autozone.com/autozone/par...er=148754_0_0_
CoolingElbows 13.95
http://www.ebay.com/itm/Dorman-Help-...599#vi-content
ValveCovers gaskets $9.78
Rock Auto - FEL-PRO Part # VS50080R
O-Rings $8.99
http://www.autozone.com/autozone/accessories/Help-30-pcs-Assortment-Fuel-Injector-O-Ring/_/N-25hc?itemIdentifier=347152_0_0_
Belt: $13.82
Rock auto - GOODYEARPart # 4060945
Thermostat $3.26
STANT Part # 13848 {#35848} OE Type Thermostat; 180 Degree Reverse Poppet (1 23/32" x 13/16" x 25/32")

[insidethreat07]

Re: Replacing Gaskets Checklist

Should I also think about doing the fuel pressure regulator?

[96RS Alex]

Re: Replacing Gaskets Checklist

Glad to see your checklist is building and of great help for all to see.

Fix the gaskets and if the FPR isnt giving you problems I'd leave it alone for now unless youre the type to have the entire top end covered.

Money well spent from Murphy's Law...

" If there is a choice between several parts going bad, the one that goes bad will be the most expensive and hardest to get to "

:D

[insidethreat07]

Re: Replacing Gaskets Checklist

I was just thinking might as well do it since everything is going to come off

[ssms5411]

Re: Replacing Gaskets Checklist

Its good to replace it if you have the chance and you have alot of miles on your car.

[xgongiveittoya44]

Re: Replacing Gaskets Checklist

I don't mean to hyjack but does the egr valve have some kind of gasket?

[insidethreat07]

Re: Replacing Gaskets Checklist

I don't mean to hyjack but does the egr valve have some kind of gasket?

I think so but Im prob going to do a egr delete since Im also planning on doing pacesetter headers and full exhaust. I have everything, Just need to install it lol
http://www.autozone.com/autozone/par.../N-jf8rhZalize

[fbodyrs96]

Re: Replacing Gaskets Checklist

Mine had no gasket and none those would fit anyway not the right shape.

[insidethreat07]

Re: Replacing Gaskets Checklist

Mine had no gasket and none those would fit anyway not the right shape.

Says they would work lol, is my egr different then yours?

[fbodyrs96]

Re: Replacing Gaskets Checklist

Far as I know there all the same, they all mount in the same spot, headers and intake no matter what year on the 95-02 3800 fbodys.