Tweet
what all can I expect to change on this? Beside known electronic stuff.
Main thing is motors if they are the same or not.
Main thing is motors if they are the same or not.
-
-
Re: How hard is it to swap a 3800 into the place of 3.4
Not the same.sigpic
-
Re: How hard is it to swap a 3800 into the place of 3.4
you would have to swap everything you would for a V8 swap. I dont think even the KMember is the same. It's not worth it IMHO, If I were ganna swap I'd just go to an LT1 or LS1Originally posted by Goatman View Post1997 Camaro RS W/T-Tops<br />All Stock / 200 HPComment
-
Re: How hard is it to swap a 3800 into the place of 3.4
the brackets on the motor its self looks like it will bolt up to the 3.4 mounts o. the k member and if thats the case it will work in a s10 with a 2.8Comment
-
Re: How hard is it to swap a 3800 into the place of 3.4
Took the words outta my mouth.Originally posted by Need4Camaro View PostComment
-
Re: How hard is it to swap a 3800 into the place of 3.4
cause I want the 3800 got all the info needed for this today.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
Comment