Okay so my car has the GU6 production code on it and I was pretty sure I had 3:42's prior to looking into it. 1st gear is kinda low for only a 4-speed transmission. Basically I did the LSD test when I was putting on my rear brakes today and I turned one wheel and the other wheel turned the opposite way. I thought that means you DON'T Have an LSD? My car had a rear sway bar and I know thats the right ratio but I am not sure why it didnt pass the LSD test. Any ideas?
Announcement
Collapse
No announcement yet.
3:42:1 GU6 Gears
Collapse
X
-
Re: 3:42:1 GU6 Gears
Originally posted by nwilson44 View PostMy car is a 2001
But if you exit a turn hard then floor it, you'll feel the limited slip action.
Comment
-
Re: 3:42:1 GU6 Gears
Originally posted by Hib Halverson View PostIf the car is an 01 and you see Y87 in the list of RPOs, you have the Zexel Torsen limited slip diff. It will not react the way one expects using the "LSD test".
But if you exit a turn hard then floor it, you'll feel the limited slip action.
Comment
-
Re: 3:42:1 GU6 Gears
All of the RPO codes should be on the sticker on the edge of the drivers door, where I'm guessing you got the GU6 code from.
I took a picture of that sticker so I could look up what my car was equipped with from the factory. If you search a little on google you should be able to find a list of what all the different codes mean for your car.
Comment
-
Re: 3:42:1 GU6 Gears
Originally posted by BirdBrain View PostAll of the RPO codes should be on the sticker on the edge of the drivers door, where I'm guessing you got the GU6 code from.
I took a picture of that sticker so I could look up what my car was equipped with from the factory. If you search a little on google you should be able to find a list of what all the different codes mean for your car.
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...3 weeks ago
Comment