Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
About 4 weeks ago I noticed a strong fuel smell while driving, and my MPH has dropped well below 20. I did recently replace the fuel pump but i don't think that would be the problem. Any suggestions? Maybe the ICU? or the brain?
thanks.
x2 on the evap system. Since you just did the fuel pump you may have pulled something loose. If you built a trap door when you did the fuel pump you could look under it for any damaged lines. You could also look under the hood on the pass side and look for any loose or damaged vacuum lines. The rest of the evap lines are ran under the body. Easiest way to check those would be to smoke test them, but would probably have to be done by a shop unless you have a smoke machine lying around. I would check what lines you can, and just run it for a bit and see if you get a DTC coming up in case there is a problem with one of the evap components like the purge solenoid or something.
Yup just a blown 20 amp. Easy fix. But I'll look at the rest thanks.
I hope its just the fuse.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
If it keeps happening then that something too look into and figure out why it is doing it . My cigeret lighter fuse went out and that cause the code scaner not to comunicate with my firebird pcm . It was an easy fix 25 amp fuse. N it was free since in the shop we had a bunch of em laying around
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment