Tweet
Hello I have a 2000 camaro. About a month ago I got a remote start installed buy best buy they did a great job. And for about 2 weeks now my security turns on and starts to blink even if i try to remote start. I bought a new key didn't solve the problem and also some times it would fix it self by turning the blinking security light into a solid light and could start with key and remote. I took it to best buy yesterday they checked the remote start for about 3 hours and it wasn't the problem. They said they have never seen something like this . So I was thinking about just by passing the vats system by using the resistors that add up to my key. Is the wiring still set up where I can find the two wires that I can put the resistors into. Or is it messed up by the remote start? And another question instead of using resistors could I just take a old key that still works cut out the resistor without damage and solder two wires to the points and put the two wires were the resistors were goin to go?
-
-
Re: Camaro security light Vats system problem help!!!
yes, you can cut the key instead of using a resistor, and it should work.
my guess is when they were installing the remote start they were rough on the key/ignition and the small wires inside broke. when you program it you have to turn the ignition on and off several times and fast.
Comment