Tweet
So I'm almost certain I have a collapsed lifter. I've tried the magic oil and various C2 products. I've read that before an oil change to run the motor with just some tranny fluid or kerosene. Will this work or is it a stupid idea and I should just rebuild the top end of the motor?
-
-
Re: lifter tap
I'll just give you my opinion. If you rebuild the top half now you may be able to get away with just that. You dont want to have to rebuild the whole thing, if you do not have to. Thats what I would do. You may have to rebuild the whole thing anyway if metal got in your oil pickup or engine in general. Good luck man, hopefully its not too bad. -
Re: lifter tap
I've heads tranny fluid as a cleaner... never as something to help a bad part. If it is bad, I'd take the opportunity to upgrade lifters, rods, and springs. .02$..Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 day ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 days ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago
Comment