Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
It would be easier just take your registration to the dealer and have them give you keys, I think you'll need a BCM with adding a new lock. I know I had to use a different Bcm when I changed out my steering column to a 02'. I think the Bcm's are matched to your key.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
It would be easier just take your registration to the dealer and have them give you keys, I think you'll need a BCM with adding a new lock. I know I had to use a different Bcm when I changed out my steering column to a 02'. I think the Bcm's are matched to your key.
Guess I'll be calling the dealer tomorrow, since its closed today.. The car doesnt really have many electrical things, locks and windows are all manual, but ill look into the bcm
If match you get the key from the dealer it should match the BCM then. They just use the vin and get you the right keys.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Saw bcm s on epay with key. Bought one actually. Anyway just read the chip on the new key/bcm with ohm meter then switcth out your resister to match new key/bcm and your done. My bad, do over, any key that turns your ignition will work if you already bypassed vats so just have a locksmith make a new one. 100 bucks?
Saw bcm s on epay with key. Bought one actually. Anyway just read the chip on the new key/bcm with ohm meter then switcth out your resister to match new key/bcm and your done. My bad, do over, any key that turns your ignition will work if you already bypassed vats so just have a locksmith make a new one. 100 bucks?
I have a spare key, but it doesnt unlock the cylinder. Is it cause its missing the little resistor chip?
The vats system reads the chip on your key , original post said you did away with the vats with a resistor chip. The key is just that a key. The resistor tells the bcm all is good. So if vats is disabled then the chip is now nothing ,nada, ziltch,dog poo etc. The bcm is reading the resistor not the key chip. I could now start your car with a screwdriver old school. That's why I'm sayin just have locksmith make a key to turn ignition, previously stated vats is already disabled no chip neccasary. If your not sure on the vats get back with me and I can explain how to override it.
Problem solved!! Chevy dealer gave me the right key!
Didnt want to tear down the steering column to change out the cylinder.
Yes Vats was disabled, but the spare i had a a flaw it didnt have a bump right were the resistor is on the original key, guess thats why it wasnt unlocking, Ill be making spares in a few days!
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment