Runnnin really rich and too much moisture... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Runnnin really rich and too much moisture...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Runnnin really rich and too much moisture...

    Well I just dropped in a new IAT, and new o2 sensors, new spark plugs, wires, and ignition coils, and the damn car is still running really rich even after its up around 160-170 deg. On top of that I'm getting alot of drip out my muffler, which has me pondering a bit more also, I mean I expect some when its cold outside but its a little more than I could ever expect... Any other ideas?

    I tried pulling my air filter also just to make sure it was breathing well, doesn't make a difference.
    1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

  • #2
    how do you know its rich without a wideband?
    2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

    Comment


    • #3
      When you can sit in the car and smell the gas, then walk around back and smell it STRONG from the exhaust you know its rich.... It's bad enough so I don't need to have it tested.
      1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

      Comment


      • #4
        I'm going to get a diagnostic on it anyways, and ohm my injectors I have to replace them. So maybe I'll get lucky and its something stupid like an injector isn't closing all the way..
        1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

        Comment


        • #5
          you smell raw fuel?

          sound like you could have a cod start misfire like i have

          i havn't figure out WTF is cuaseing it yet chaning injecotors soon see if it those

          lol
          www.turbov6camaro.com
          1997 3800 Series II Camaro
          4600 Stall for my ride to the mall :chug:
          7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
          11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

          Comment


          • #6
            Originally posted by viper04af:
            you smell raw fuel?

            sound like you could have a cod start misfire like i have

            i havn't figure out WTF is cuaseing it yet chaning injecotors soon see if it those

            lol
            ugh.. well hopefully I'll figure it out, I want to put new high voltage coils in it anyways, sick of these factory things they call coils.... And these things the guy that owned it before me he called spark plug wires, brand new sure, but talk about $10 wires, looks like you could find them at the dollar store let me tell ya... I did the plugs so far, but that was all in a mess cause I literally had one broken, and no cash on me, so I had to...

            Aww well I'll get it scanned soon too, maybe in the next day or two if I get the time, find out whats triggering my SES..
            1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

            Comment


            • #7
              are you disconnecting the battery between parts changes?
              01 Firebird A4 3.42
              Powerdyne @ 6 PSI
              and other mods
              Visit Project Unleashed for guides and info.

              Comment


              • #8
                Originally posted by grayman:
                are you disconnecting the battery between parts changes?
                For sure! And let it idle after I reconnect it when I am done, for about 20 minutes generally to just make sure, besides not like it hurts it to actually sit in normal operating rpm for a few minutes.. I have an issue at driving at 70 in 3rd for instant get up.

                Thought today though just overlooked it, I have been putting alot of 110 Racing fuel into it, that might be part of my issue, also I did cut my cat and break the plates out of it.
                1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

                Comment


                • #9
                  Originally posted by Nikos95:
                  </font><blockquote>quote:</font><hr />Originally posted by grayman:
                  are you disconnecting the battery between parts changes?
                  For sure! And let it idle after I reconnect it when I am done, for about 20 minutes generally to just make sure, besides not like it hurts it to actually sit in normal operating rpm for a few minutes.. I have an issue at driving at 70 in 3rd for instant get up.

                  Thought today though just overlooked it, I have been putting alot of 110 Racing fuel into it, that might be part of my issue, also I did cut my cat and break the plates out of it.
                  </font>[/QUOTE]110 willl kill your O2 sensors
                  www.turbov6camaro.com
                  1997 3800 Series II Camaro
                  4600 Stall for my ride to the mall :chug:
                  7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
                  11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty

                  Comment


                  • #10
                    - Very skeptical of any kind of additive (for oil or gas)
                    2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

                    Comment


                    • #11
                      No additives its racing fuel from the pump... lol but ya I figured it would kill my sensors, I am going to replace them with simulators.
                      1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

                      Comment


                      • #12
                        Originally posted by Nikos95:
                        I am going to replace them with simulators.
                        Bad idea. Your car needs them. Just lay off the useless race gas. Stick with 87, because that's all you need.
                        Matt
                        1998 Mystic Teal Camaro M5
                        Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.

                        Comment


                        • #13
                          Originally posted by 98Camaro3.8:
                          </font><blockquote>quote:</font><hr />Originally posted by Nikos95:
                          I am going to replace them with simulators.
                          Bad idea. Your car needs them. Just lay off the useless race gas. Stick with 87, because that's all you need. </font>[/QUOTE]Can't and wont, I'm replaceing my cam, heads, valve covers, lifters, rods, springs, crank, exhaust, injectors, bearings, and I highly plan on putting either a turbo on it or this Ati supercharger I have been looking at. But it will be quite the job. I hate running 87 I refuse to run 87 in anything. 90 is the lowest I ever run in any car, I can feel too much difference, the computer was reset today for 92, so I think I'm going to start dumping that in it, save me a little cash anyways. I just wish this car ran as well as my bike on 110....
                          1995 Camaro 3.4 A4<br /><br />CAI,IAT Relocate

                          Comment


                          • #14
                            isn't racing fuel leaded gas, and if you can read on the dash it says use unleaded, you should just go blow that some ***** up and buy a new motor. hell you prolly have a hole in your piston by now runnin 110 lol

                            word of the wise your engine isn't fast it won't be without serious mods and puttin 110 in it isn't doing much besides not fully burning hence why you smell gas in the exhaust.

                            the 87 flash point is the right size for the motor but 110 is a slow burning fuel so your only wasting you time and your cash that you could spend on real mods by filling up with 110
                            95 camaro 3.4auto, 3:23 gears, K&n intake, jet stage 1 chip, clear corners, flowmaster 80series, carsound cat,

                            Comment

                            Latest Topics

                            Collapse

                            • Andy H
                              Transmission removal help!!
                              by Andy H
                              Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                              2 weeks ago
                            • 2.8 Bird
                              Abs inop
                              by 2.8 Bird
                              Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                              3 weeks ago
                            • fishin
                              Intermittent Headlight Function 97 Firebird
                              by fishin
                              I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
                              3 weeks ago

                            FORUM SPONSORS

                            Collapse
                            Working...
                            X