I have a pair of Accel extreme 9000 Wires. I broke the head off one of them when doing a plug change. Would it be bad if I used a stock wire for that plug and the rest were still accel's? I will eventually order a new pair but I dont want to wait for plug wires to get here. Would this be bad?
Announcement
Collapse
No announcement yet.
PLUG WIRES
Collapse
X
-
certainly not ideal on the waste spark system, but it might suffice for the time being. you may or may not get a ck engine light, but i see no reason the coil should not continue to fire both plugs on each crank revolution.
replace wire with proper replacement ASAP however.ASE Master, L1, X1, C1. Instructor in automotive systems. 99 3800 4L60E with a few mods and a greatful dead sticker on the back window.
-
just pull the head off another one and use it2001 SOM Camaro SS<p>Direct flo lid---Lakewood LCAs----Edelbrock Torque Arm-----Lous Short Stick---Dynomouth 3\" Exhaust---SLP Center Mount Exhaust---Poly tranny and torque arm mounts.<p>My site....http://community.webshots.com/album/49413018hRfdbP
Comment
-
your talking about the little boot on the end right? they slide off if thats what your talking about2001 SOM Camaro SS<p>Direct flo lid---Lakewood LCAs----Edelbrock Torque Arm-----Lous Short Stick---Dynomouth 3\" Exhaust---SLP Center Mount Exhaust---Poly tranny and torque arm mounts.<p>My site....http://community.webshots.com/album/49413018hRfdbP
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago
-
by fishinI usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment