Tweet
Has someone here posted a step by step guide (or is there one available elsewhere) to installing new plugs and wires on a 3.8 (pre 2000). I want it to go as smooth as possible when I start this weekend.
-
1998 Camaro M5, Sports Appearance Package, K&N,CAI,Whisper Lid, Dynomax Superturbo exhaust,Carsound Converter.<p><a href=\"http://members.cardomain.com/canadiancamaro\" target=\"_blank\">http://members.cardomain.com/canadiancamaro</a> -
Haynes / Chilton's manual. Simple task, just time consuming if you don't access the plugs right.
-Rob<b>97 Camaro 3.8L M5</b><br />Car for sale<a href=\"http://terpmotors.com\" target=\"_blank\">terpmotors.com</a> Terrapin Motorsports! UMCP -
might want to do a search.. yeah it's gonna take a while to find what you want but it has been posted on here numerous times about how to get to each plug.. quick and dirty..
front of car left and right sides from the top.. rear most left and right from the bottom
driver side middle from the bottom
passenger side middle, put the socket with 3 inch extension on from the bottom.. go to top put on universal joint another extension and loosen and tighten from the top.-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock:Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment