Tweet
one of my fog lights has been out for a while and i finally bought a replacement bulb this week. I noticed that there is a small crack/hole in the thick glass protecting the fog light, do i need to get a new housing? wuld the bulb give out if i put it in that housing??
-
Black 1995 3.4 -
well i wouldnt really consider it a fog light(driving light)I would replace whole thing if it has a crack then moisture will get in and ruin the new bulb.2001 SOM Camaro SS<p>Direct flo lid---Lakewood LCAs----Edelbrock Torque Arm-----Lous Short Stick---Dynomouth 3\" Exhaust---SLP Center Mount Exhaust---Poly tranny and torque arm mounts.<p>My site....http://community.webshots.com/album/49413018hRfdbP -
You'll have to buy a new housing, including the lens. I went through the same problem w/my '94.
[ May 11, 2002: Message edited by: Fin ]</p>2001 Onyx Black Camaro M5-Totalled<br />2005 Ford F150 XLT 5.4L<br /><br />\"To make peace, prepare for war.\"Comment
-
How much is the actual bulb? I bought a new housing, but my bulb (a wire from it seperated inside the glass bulb). I bought the housing from (Viper2@chesnet.net) He has all kinds of replacement parts for 4th gen f-bods. Drop him an e-mail. I needed a replacement speaker grille and a fog light and had been looking for months, I e-mailed him and he had both for me. He charges me $35 for both shipped, whereas GM wants $75 for a replacement fog light alone. Hope he can help you out. Later.1993 3.4 <br />Borla rear section<br />3 inch Catco High Flow Cat<br />2.75 inch I pipe (Picked one up from an LT-1 guy for a whole $10)<br />K&N Fipk <br />180° T-stat<br />Jet Stage II<br />10 Spoke Z28 Wheels<br />NGK\'s, Taylor Spiros<br />Mobil 1 synthetic<p>Email Viper2@chesnet.net for 4th gen replacement parts.Comment
-
The bulb itself is around $7. I got my fog light housing from a local F-body salvage yard for $50.2001 Onyx Black Camaro M5-Totalled<br />2005 Ford F150 XLT 5.4L<br /><br />\"To make peace, prepare for war.\"Comment
-
So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...16 hours ago -
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago -
Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
Comment