Tweet
If you have or know who has, can anyone tell me what size belt I need to get? Thanks!
-
1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM Swaybars -
61.5 or 62.0
Get everything around that size, and play with it until it fits. MIght struggle to find an appropriate size with aftermarket pullies. I had to go back to my stock water pump pulley, instead ofthe ZZP one.<b>97 Camaro 3.8L M5</b><br />Car for sale<a href=\"http://terpmotors.com\" target=\"_blank\">terpmotors.com</a> Terrapin Motorsports! UMCP -
If I have stock pulleys and everything that the belt will be on is stock, what size? 62.0?1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
david it's hot man. we are in texas. next month 100+ temps are coming.2000 FIREBIRD NBM<br />Thanks to:<br />TSP, ZZP, TCI, Comp Cam, Whisper, GM, Lakewood, TrafficJamz Car Audio,HP Tuner, Alterstart, texas drivetrain and performance, BMR<br /><br />1990 BLUE CAMARO RS<br />1980 z28 <br /><br />venom-vi vice presidentComment
-
Nightrida-I have a daily driver...lol.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
ok then its a different story. ac delete, electric water pump, smog delete, ect ect... go for it.2000 FIREBIRD NBM<br />Thanks to:<br />TSP, ZZP, TCI, Comp Cam, Whisper, GM, Lakewood, TrafficJamz Car Audio,HP Tuner, Alterstart, texas drivetrain and performance, BMR<br /><br />1990 BLUE CAMARO RS<br />1980 z28 <br /><br />venom-vi vice presidentComment
-
Get a peice of string, wrap it around as if it were the belt then cut it to length... then measure it and you have your belt length. amazing huh? [img]smile.gif[/img]Comment
-
aint working out......hmmmmmmm.....1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
So no ones got a no AC 3.8L, huh? I've tried the 60.5inch and 61 inch...neither work.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
61.5 or 62!! GOSH DARNIT> I thought it was 60.5 or 61!!! YAR.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
If the 61 is close get something just a bit larger. Or you could just measure it like Hawgs said.
CpComment
-
Just curious why you're doing this? To save weight?<b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.Comment
-
Is a race car. Lol. Save weight, less front end mass, gain a few HP.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
if ur compressor is good ill take it the front seal on mine is gone and it is hot here in tx Bradram air, K&N, hi flow cat, 3 inch piping, lowered 1.75\" , sway bars, Eagle rims series 77, kumho ecasta supra 712Comment
-
I took all my a/c stuff out. I run a 61 inch belt.I measured it like hawgs said and it worked perfectly. i haven't had a/c for about 1 1/2 years now. I have all stock pulleys. I dont have the tensioner pulley though either.96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment