Tweet
If you have or know who has, can anyone tell me what size belt I need to get? Thanks!
-
1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM Swaybars -
61.5 or 62.0
Get everything around that size, and play with it until it fits. MIght struggle to find an appropriate size with aftermarket pullies. I had to go back to my stock water pump pulley, instead ofthe ZZP one.<b>97 Camaro 3.8L M5</b><br />Car for sale<a href=\"http://terpmotors.com\" target=\"_blank\">terpmotors.com</a> Terrapin Motorsports! UMCP -
If I have stock pulleys and everything that the belt will be on is stock, what size? 62.0?1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
david it's hot man. we are in texas. next month 100+ temps are coming.2000 FIREBIRD NBM<br />Thanks to:<br />TSP, ZZP, TCI, Comp Cam, Whisper, GM, Lakewood, TrafficJamz Car Audio,HP Tuner, Alterstart, texas drivetrain and performance, BMR<br /><br />1990 BLUE CAMARO RS<br />1980 z28 <br /><br />venom-vi vice presidentComment
-
Nightrida-I have a daily driver...lol.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
ok then its a different story. ac delete, electric water pump, smog delete, ect ect... go for it.2000 FIREBIRD NBM<br />Thanks to:<br />TSP, ZZP, TCI, Comp Cam, Whisper, GM, Lakewood, TrafficJamz Car Audio,HP Tuner, Alterstart, texas drivetrain and performance, BMR<br /><br />1990 BLUE CAMARO RS<br />1980 z28 <br /><br />venom-vi vice presidentComment
-
Get a peice of string, wrap it around as if it were the belt then cut it to length... then measure it and you have your belt length. amazing huh? [img]smile.gif[/img]Comment
-
aint working out......hmmmmmmm.....1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
So no ones got a no AC 3.8L, huh? I've tried the 60.5inch and 61 inch...neither work.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
61.5 or 62!! GOSH DARNIT> I thought it was 60.5 or 61!!! YAR.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
If the 61 is close get something just a bit larger. Or you could just measure it like Hawgs said.
CpComment
-
Just curious why you're doing this? To save weight?<b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.Comment
-
Is a race car. Lol. Save weight, less front end mass, gain a few HP.1996 Camaro, Built Motor(L/C,Cam, Ported), T66 FFF Kit, N20, 36 lb. Inject., FMU, 255 Walbro, 00+ Manifolds, SFC, LCA, Tubular K, Adj. PHR, 17x9.5,x11 Chrome ZR1, Front 35MM/Rear 21 MM SwaybarsComment
-
if ur compressor is good ill take it the front seal on mine is gone and it is hot here in tx Bradram air, K&N, hi flow cat, 3 inch piping, lowered 1.75\" , sway bars, Eagle rims series 77, kumho ecasta supra 712Comment
-
I took all my a/c stuff out. I run a 61 inch belt.I measured it like hawgs said and it worked perfectly. i haven't had a/c for about 1 1/2 years now. I have all stock pulleys. I dont have the tensioner pulley though either.96 3.8 red camaro. <br />headers,cam,valve springs,retainers,auburn lsd,3.73 gears,SLP cold air,accel coils,24lb injectors,8mm plug wires,air temp module,LT1 diveshaft,removed a/c,edelbrock torque arm,spohn LCA\'s and PHRComment
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 days ago -
Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 days ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment