Plugs and wires with headers.

[tucsoncamaro]

I just got some ceramic coated pacesetter headers with full 3 inch exhaust. I believe I need to upgrade my plugs and wires. It is a 3.4l v6. What would be a good set of wires Taylor Spiral Pro Wires 3.4 or Accel Super Stock Spiral 3.4. Also what are some good plugs to use with this dont want anything to expensive.

[95Batmobile]

Get some standard Autolite Plugs, they're an excellent plug and not expensive at all. Gap them at .46

If you want to get cheap wires, I would get accel, if you want to spend about $60 you can get some MSD SuperConductors, they're nice wires.

[94TeaL]

Accels are fine.. get some autolites like he said also. I got the AR25's Racing ones.

[tucsoncamaro]

All right thanks. I am assuming you can pick the plugs up at a autozone or pepboys. How much did they run you for all six.

[94TeaL]

Around 2 a plug..
expect around 40-50 for accel wires.

[RallyRed 98]

or get the cut to fits for $28 at advance... i put some on yesterday and they are working great! of course, anything is better than 2 melted plug wires

[img]graemlins/twak.gif[/img] : my plug wire routing skills

[94TeaL]

Originally posted by RallyRed 98:
or get the cut to fits for $28 at advance... i put some on yesterday and they are working great! of course, anything is better than 2 melted plug wires

[img]graemlins/twak.gif[/img] : my plug wire routing skills

what brand is that? i work at advance.

[RallyRed 98]

accel superstock, HEI or non-HEI boots... the boots have to be modified a bit, but nothing to fret over. you can also route them the way you want and cut them so they fit perfectly; looks really nice except for the ugly yellow color.

[94TeaL]

I got the 5040 Unvi ones.. Cut and make yourself, straight boots like stock too.