v8 engine swap - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

v8 engine swap

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    That's what I'm wanting to do is some bolt-ons. what are some of the names of headers, exhaust and intakes, or what cars i can get this off of.

    Comment


    • #17
      Pacesetter are the headers and you just take your car to a exhuast shop and have them put a 3" exhaust on, although Summit sells a Dynomax 3" over the axle exhaust pipe for like $125 shipped thats the only part youll need since most exhaust shops dont have a mandrel bender. Youll pay close to $300-400 for a 3" exhaust. Youll need a 3" cat too. Then pick your muffler with tips, Dynomax super turbo muffler is one of the best mufflers for sound. But theres flowmaster , magneflow and tons of others to choose from. For a lid youll have to shop around.
      08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
      96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

      Comment


      • #18
        Originally posted by ch3vyman816 View Post
        That's what I'm wanting to do is some bolt-ons. what are some of the names of headers, exhaust and intakes, or what cars i can get this off of.
        Pacesetter makes a set of headers for these cars... but here's the thing - if you plan on going turbo, forget the headers as you'll need to either make a custom set or use the set that comes with a kit as the pacesetters won't work (nor will any other N/A headers/exhaust manifolds for that matter)

        What do you plan on using the car for? You mentioned show car...are you going to be racing with it? What type of racing? Drag? Road Course? Auto cross? Is it just going to be a weekend cruiser that you open up every so often on some clear road for a little exhilaration? Is it just a daily driver you want to have a little more fun with?

        And then - what is your technical knowledge background when it comes to doing the work? How much mechanical skill do you have?

        2002 SOM Z28 Camaro - 12.9 @ 104 mph
        1996 3800 Camaro - 13.43 @ 100.77 mph


        Project Cars | How To Guides | Scratch Repair | Synthetic Oil

        Comment


        • #19
          It will be a daily driver to just have some fun in and show off my work.

          Comment


          • #20
            well if it were me then start off with the bolt ons and get comfortable with your car...a little weight reduction (light weight suspension, rims, remove unnecessary weight) try and dive into doing some tuning on your own and see what you like/don't like about your car...then from there you can make a plan on what you want to do based on what type of performance you want to gain and what things you want to sacrifice as a result

            2002 SOM Z28 Camaro - 12.9 @ 104 mph
            1996 3800 Camaro - 13.43 @ 100.77 mph


            Project Cars | How To Guides | Scratch Repair | Synthetic Oil

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X