Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I order a 2 in tach 2 in voltage meter and adjustable shift light on a daul gauge pod. the shift light and the voltage meter both work. the tach however wont. the lights come on in it. but it wont budge i had it setup for 6 cyl and everything. the only thing i can think of is the tach is bad. anyone have any other ideas? the tach is stuck at between 800 and 1000 it will move a little if i lean it to one side. it stays there if the cars on or off.
It sounds like a bad tach. but depending on what brand it is you may need a tach. adapter. I know a lot of Autometer tach's have to use tach. adapters.
when i had my camaro, i just tapped the wire that goes to the coil(on a real car) into the factory tach feed and it worked fine. i had the 5" autometer hooked up
Had to be evacuated Monday again after a fire was going on the hill behind us. Only 3-4 hours, they did a good job getting it under control. Especially...
Up for sale is my 2001 Chevrolet Camaro 3.8 in need of some TLC and help. I’ve owned this vehicle the past 18 years (since 2006) and it’s been very...
4 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment