Tweet
car is not idling right, ive replace every thing, plugs, plug wires, air and fuel filter, injectors, coil packs,pcv valve. Its a 3.8, 1999 model, it idles at about 625 rpm, does that sound right. When i plug my scanner into it, the only thing that shows up is evaporative system monitor, i do not have any check or service engine lights on. Could that be it, and where is it located, i traced all my vacuum lines under the hood and they all look good. Some ones got to help me, with all the problems ive been having im fixing to sell it, any one interested?
-
<a href=\"http://www.cardomain.com/ride/2245261\" target=\"_blank\">http://www.cardomain.com/ride/2245261</a> Green 1997, 105k, all stock except for Z28 front springs, Air shocks in the rear, home made coolant recovery tank, home made battery hold down. -
If it's saying Evap Emmisions Monitor, check the hose that's coming from the passenger side of the engine. It's plastic and looks like this http://pics.xs.to/pics/04082/P1010018.JPG
and here is the link I got it from http://www.camarov6.com/ubb/ultimate...c;f=1;t=013539
That hose is plastic, breaks very easily, and it threw many of Evap Emmision codes at me. I replaced the plastic hose with a regular rubber vacuum hose. It works much better!sigpic
-
So there going to be anything new or update to the site since Bill is now the owner?
I know there's still alot of interest in the fbody V6....4 hours ago -
All - sorry but there seems to be some glitches from moving to a new Host - hopefully they will be fixed soon.
If needed you can email me...1 week ago -
I am happy to announce that I have sold the site to Robert (FirebirdGT). Years ago this site went down when TealV6 had it, I bought it, refreshed it,...4 weeks ago
Comment