Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Are there any special tools that i need to change the fuel filter on my car? I don't exactly want it blowing up in my face or losing too much gas. thanks...
1996 Red Camaro 3.8L<br />Details, you say? Go here.<br /><a href=\"http://www.angelfire.com/trek/brl866s/camaro.html\" target=\"_blank\">Slick Red</a><p>\"A Great Warrior defeats his enemies by smashing their fists with his face.\" - A Great Warrior
No, no special tools needed. You just need a wrench (I forget what size) and a LOT of rags. The one end of the filter is kinda like an air hose fitting, you pull a metal sleeve back and it pops off. The other end requires 2 wrenches> one to hold the filter still, and the other to turn the nut. Have some rags handy and try not to have your face directly below the filter while performing this or you'll know what 87 Octane tasts like...like I did.
Oh, this may qualify as a "DUH", but DON'T SMOKE!!!!!
Marc.
Will i need to jack the car up on some jackstands or can i just get to it on the ground? Also, can i catch any leaky gas into a CLEAN bucket? and put it back in the tank?
1996 Red Camaro 3.8L<br />Details, you say? Go here.<br /><a href=\"http://www.angelfire.com/trek/brl866s/camaro.html\" target=\"_blank\">Slick Red</a><p>\"A Great Warrior defeats his enemies by smashing their fists with his face.\" - A Great Warrior
you dont need tons of rags just one...just run your car till its basically out of gas. then get the wrench and change it. yes some is going to come out but just get a pan to let it run into
2001 SOM Camaro SS<p>Direct flo lid---Lakewood LCAs----Edelbrock Torque Arm-----Lous Short Stick---Dynomouth 3\" Exhaust---SLP Center Mount Exhaust---Poly tranny and torque arm mounts.<p>My site....http://community.webshots.com/album/49413018hRfdbP
Try taking off your gas cap and then releasing pressure at the shcreder valve on the fuel rail.(make sure you tuck some rags under the valve. When you take off the filter at least it won't spray on you but you will get some that drips out.
95 Camaro 3.8L Y2K motor <br /><a href=\"http://www.cardomain.com/id/coriya71\" target=\"_blank\">www.cardomain.com/id/coriya71</a>
Is there a way to keep the fuel leakage to a minumum?
1996 Red Camaro 3.8L<br />Details, you say? Go here.<br /><a href=\"http://www.angelfire.com/trek/brl866s/camaro.html\" target=\"_blank\">Slick Red</a><p>\"A Great Warrior defeats his enemies by smashing their fists with his face.\" - A Great Warrior
You can pull the fuse for the fuel pump & start the car for a few seconds until it starts to stall, then shut it off. Supposedly this will get the fuel out of the lines. Whenever I used to do one, I just took the gas cap off whatever car I was working on & went to work. BTW, you'll beed a crescent wrench & a 5/8 open-end wrench for the job. Just make sure before you start the car you put the fuse for the fuel pump back in, & then turn the key to the ON position (don't start the car) to prime the fuel system. Do this once or twice, then you can start the car.
2001 Onyx Black Camaro M5-Totalled<br />2005 Ford F150 XLT 5.4L<br /><br />\"To make peace, prepare for war.\"
<blockquote>quote:</font><hr>Originally posted by Fin: You can pull the fuse for the fuel pump & start the car for a few seconds until it starts to stall, then shut it off. <hr></blockquote>
Never though of that, Thats a good idea. I might replace mine soon and I'll try this technique. Thanx!
Marc
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment