Tweet
Ok I tried wiring up my gauges today and ran into some problems. I didn't get very far. I tried hooking up the gauges lights to the stereo lighting/dimming. This didn't work. I tested the gauges on the battery and they worked fine. Am I tapping into a weak wire?? What other places can I tap into for a lighting source???? PLEASE HELP!!!!!!!!
-
Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come.... -
Should be 12v wherever you tap into when it comes to dash lighting2000 GTP<br />Pulley, Intake<br />ET - 14.02<br />Trap - 97.15 -
Um, you have an accessory 12V port in your fuse box. you crimp a flat end connector onto the wire, or just shove the wire in there.
should be dead center of your fuse box in the car.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 day ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...3 days ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago
Comment