Will the ZZP underdrive pulleys work on out engines? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Will the ZZP underdrive pulleys work on out engines?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Will the ZZP underdrive pulleys work on out engines?

    I saw the ZZP underdrive pulleys for transversely mounted 3.8 engines, but will they work w/ our pulley setup? I hear that underdrive pulleys increase hp slighlt as well as allow the engine to rev quicker. Is this true? Thanks for the help guys.
    2001 Arctic White Firebird<br />T-Tops, 3.42 rear gear stock<br />Mods:K&N Air Filter,Whisper Air Induction Lid, maf screen removed, raised air box, Kumho Ecsta 712 255-50-ZR16 tires, BMR stb<br />Mods not installed yet: FTRA, SLP Lsd/Differential cover<br />Near Future Mods: HPP3, GMMG 3\" Exhaust , 1LE Swaybars, Transgo Shift Kit, MSD-DIS-4 w/ Accel Coil-Packs, Turquoise Blue Neon Underbody Kit, BMR Adj. LCA\'s, G2 Sfc\'s & V-braces, Pacesetter headers

  • #2
    the claims of increased horsepower and tq at the crank are legitamate. but they are also grossly exaggerated (arent the advertising claims for nearly all the mods out there?).

    will these particular pulleys work on our 3800's??? i dunno... try and tell us :D just kidding... call em and ask.

    [ May 25, 2002: Message edited by: strange_trp ]</p>
    ASE Master, L1, X1, C1. Instructor in automotive systems. 99 3800 4L60E with a few mods and a greatful dead sticker on the back window.

    Comment


    • #3
      They won't reply to my e-mails.
      2001 Arctic White Firebird<br />T-Tops, 3.42 rear gear stock<br />Mods:K&N Air Filter,Whisper Air Induction Lid, maf screen removed, raised air box, Kumho Ecsta 712 255-50-ZR16 tires, BMR stb<br />Mods not installed yet: FTRA, SLP Lsd/Differential cover<br />Near Future Mods: HPP3, GMMG 3\" Exhaust , 1LE Swaybars, Transgo Shift Kit, MSD-DIS-4 w/ Accel Coil-Packs, Turquoise Blue Neon Underbody Kit, BMR Adj. LCA\'s, G2 Sfc\'s & V-braces, Pacesetter headers

      Comment


      • #4
        From what i heard, the pulleys on your cr now are pretty much the limit you can go on a pulley. they would ave made a set for your car by now if they didn't, the 3.4L was around for 2.5 years, and we have them, the 3.8L has been around for nearly 7.5 years and you don't really have them yet.

        Comment

        Latest Topics

        Collapse

        • Dongrossmd
          Throttle Position Sensor trouble shooting
          by Dongrossmd
          I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
          1 week ago
        • ssms5411
          New stereo
          by ssms5411
          Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
          1 week ago
        • 187shark
          Tail light issue causing problems. Please help..
          by 187shark
          Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
          3 weeks ago

        FORUM SPONSORS

        Collapse
        Working...
        X