what mods are there for the 1996 camaro that would improve performance? such as tb port and polish and anything else. is it true that the P&P will cause it to run poor unless you have a maft+? any ideas would be great. thanks in advance.
Announcement
Collapse
No announcement yet.
1996 free mods?
Collapse
X
-
I don't think if you P&Ped the heads it would cause it to run lean or rich. My friend works at a machine shop and done a few cars. However if you P&Ped the Throttle Body I think that would be an issue and you would have to get a MAFT. Too much of a problem if you ask me though. And after the purchase of a maft, and probably an A/F gauge, it's not too free.
-
I would not recommend P/P the Throttle Body. You could cause more harm than good and the performance aspect isn't worth the troulbe if there is any. I really can't think of any free performance mods, but and SLP intake is a good mod which won't break the bank.<b>99\' Black Camaro SS</b> <br />M6/T-Tops - SLPLid w/K&N | Hurst Billet Plus w/ LSS | EGR Mod<p>Black 97\' Camaro T-Tops (RIP)
Comment
-
Yea I caused a nightmare just taking my TB off. Made the mistake of not using gasket sealant on the gasket and all this antifreeze flooded my engine, fouling out all my spark plugs and ruining a lot of sensors on it's way. Talk about fun.
Comment
-
tb bypass is almost free...
radio shack resistor is almost free....
manual fan switch is free if you have a spare switch and a soldering gun and some wire lying around... like i did :D
you can pull that stupid scilencer thing off the side of the airbox
remove the spare tire and jack??? i guess thats free...
the autozone 160 and 180 degree thermostat are about 3 dollars.
i guess thats about it
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...15 hours ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
Comment