Removing power steering pulley and assembly

[whiteThunder]

Can anyone tell me if there is any way to remove the pulley in front of the power steering resevoir (top right pulley on a 3.4). i have all screws out except the 2 behind the pulley, and want to know if there is an easier way. thanks eric

[viper98885]

There is a special tool made for that. It's called the PS Pump Pulley remover and can be rented from Autozone for like $15 or so. You will need it to install the pulley back onto the shaft. When you are done with the tool, you can return it for a full refund.

[FlamespikeMST1]

for the pulley its like viper said.
for the power steering assembly, theres one screw very visable by the crankshaft pulley.
another-right above it in a hidden area, in the "pocket" of the power steering assembly <ill try to get a pic>
another to the right of the coil packs, and one more behind the 1-4 coil pack, so dissammbly of that s required too.
then you have 2 15mm nuts in the back, those are the real pain.
then just pull the pump out and down. thats all to it.
and just in case u didnt know, you dont have to take off the pulley to take off the assembly