Tweet
what the process for seafoaming? like where to put it to clean my TB and any other places people put it?
Andrew
Andrew
-
1997 Black 3.8L Camaro RS {SOLD}<br />Mods:<br />Flowmaster American Thunder Cat-Back<br />Slp Cold Air Intake<br /><br /><br />2001 Dodge Durango R/T -
Do a search....Seafoam has been discussed in a lot of detail a lot of times! Try looking in General tech, there should still be about 2 topics regarding Seafoam..what it does and where to put it.94 Camaro 3.4 A4 <br />T-Tops<br />In the process of an LS1 swap. -
my bad, i know what it is and have used it before i had just never tried a TB clean with it. Thanks for the help1997 Black 3.8L Camaro RS {SOLD}<br />Mods:<br />Flowmaster American Thunder Cat-Back<br />Slp Cold Air Intake<br /><br /><br />2001 Dodge Durango R/TComment
-
yep, and when all else fails. directions on the can:
When added to crankcase
one pint treats 10 quarts of oil. for use in all motor oils including synthetic
When added to gas tank
one pint treats 8-25 gallons of fuel
when used through injection or carb
with engine running slowly pour half pint through carb,throttle body, or direct manifold vacum line that will feed all cylinders. possible sources are pcv (i dont recomend this one) and brake booster line (try this one). turn ignition off. restart after 5 min. be sure exhaust is well ventilated. fumes will be extreme for a short time (theyre not kidding)Comment
-
I just did the seafoam engine treatment for the first time to my car. I noticed a difference in throttle response and such. Didn't get as much smoke as people warned me though. I guess its because i have a heavy foot [img]smile.gif[/img]
It makes sense though, if you drive hard and/or do alot of highway driving, there shouldn't be that much carbon buildup to burn.- <a href=\"http://www.thenebula.com/carpics/pics2/camaro2.JPG\" target=\"_blank\">White \'99 V6 Camaro</a> (M5, 3.23s)<br />- 3\" Borla Exaust, RK Sport Induction Lid, Fast Toys Ram Air, K&N Air Filter, !Silencer, !MAF Screen, B&M Short shifter, Manual Fan Switch, 160° Hypertech Powerstat, BMR Boxed LCAs(rubber/poly), BMR STB<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=386884&page=1\" target=\"_blank\">*My Cardomain Website*</a>Comment
-
moving to gen tech....Keith - 99 'maro - White M5 - bumpstick and boltons - 13.65 @ 101 N/A
"I ain't too big to listen to the rumors, I'm just too @#$% big to pay attention to them" - Dr. Dre
http://seppo.hopto.org/Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment