Tweet
I was just looking at the hypertech programmer for the LS1 engine, it says "Adjusts engine redline from 5800 RPM to 6600 RPM in 100 RPM increments. " isnt 6600 pretty high for auto to change gears? i mean our cars only go upto about 7000 [img]smile.gif[/img]
-
-
They give us this option so that at wot, we can shift back into our useable powerband. I worry about valve float at high rpm's, so i won't do it when i get it.2001 Arctic White Firebird<br />T-Tops, 3.42 rear gear stock<br />Mods:K&N Air Filter,Whisper Air Induction Lid, maf screen removed, raised air box, Kumho Ecsta 712 255-50-ZR16 tires, BMR stb<br />Mods not installed yet: FTRA, SLP Lsd/Differential cover<br />Near Future Mods: HPP3, GMMG 3\" Exhaust , 1LE Swaybars, Transgo Shift Kit, MSD-DIS-4 w/ Accel Coil-Packs, Turquoise Blue Neon Underbody Kit, BMR Adj. LCA\'s, G2 Sfc\'s & V-braces, Pacesetter headers -
I read that the ASE chip gives u 500 RPM over the rev limitter.A little to much to use in our cars.isn't it?~S87 Black 99 Firebird~Comment
-
yes heh, i would never pass red area if i had m5 anyways imo, i think a4 changes the gear at a great place (5800, which is right before red area)Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment