Tweet
what will my new displavement be after boring my block .030 over? Also, what will my compression be?
-
-
3.43Originally posted by whiteThunder:
what will my new displavement be after boring my block .030 over? Also, what will my compression be?
and not 100% but the pistons are bigger so your C/R won't change any if at allwww.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
-
no i think compression will changeComment
-
A .030" will take you to a 208.2 cu.in. displacement which is 3.411 liters. And Viper is right, your compression will change very little.- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...3 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...4 weeks ago
Comment