Tweet
today, i noticed when i turned on my left turn signal to turn, the green arrow on my guage cluster didnt blink like it should...it stayed on. this usually means that one of my turn signal bulbs is out. so i check, and the only light not working is the day time running light on the driver's side (the larger of the two turnsignal lights). so i think, no big deal...its happened berfore...i just need to replace the bulb. well, i got home and changed the bulb out that's not working and it still doesnt work. i even tried the bulb from my right turn signal because i know its fine, but it wont work in my left turn signal either. can anybody give any suggestion as to whats wrong? the only thing i can come up with is...maybe the fixture that the bulb goes into is out. i dont know. please help!
-
-
Mine does that when the relay goes bad (and trust me they are a POS) The relay is located under the knee panel of your dash (DS) next to the steering column. Go get a heavy duty one and problem should be solved for a while (mine lasts about 3 years).Joel<br />God is my copilot, but Satan has his foot on the gas!<br />94 3.4L AutoCamaroRagtop w/MSD ignition,Accelcoilpacks,K&N FIPK,BMR SFC&STB,3\"Catco w/3\"catbackSS muffler,JetStage 2,HomemadePIAAheadlightconversion <a href=\"http://www.geocities.com/cardiac1968\" target=\"_blank\">http://www.geocities.com/cardiac1968</a> -
CARdiac, thanks for the advice. how would i go about getting a relay? do i need a certain one?Comment
-
mine does the same. Havent had time to lookin to the relay yet. But if its the fixture get ready to pay for it. That lil peice of plastic with 3 wires is 55$ at my local dealership and there the only ones that can get it! Sucks. So i been living without a left TS for about 2 months
lol-Matt<br />Manager/Tech Support<br />Precision Speed & High Performance<br /><br />visit us on the web at:<br /><a href=\"http://www.precisionspeedonline.net\" target=\"_blank\">www.precisionspeedonline.net</a>Comment
-
well, i ended up taking it to the dealership. it was the socket for the bulb that was out. the dealership charged me $105.12 for the job :rolleyes:Comment
-
<blockquote>quote:</font><hr>Originally posted by Majestic43:
well, i ended up taking it to the dealership. it was the socket for the bulb that was out. the dealership charged me $105.12 for the job :rolleyes: <hr></blockquote>
That happened to me on both sides. The ground wire for the socket got loose and caused the turn signal not to work. I just got some used ones, soddered them together, good as new!<a href=\"http://www.pbase.com/danny83/car_pix\" target=\"_blank\">http://www.pbase.com/danny83/root</a><br /><a href=\"http://community.webshots.com/user/ttopbird96\" target=\"_blank\">http://community.webshots.com/user/ttopbird96</a> [/URL]<br />00 NMB Formula M6<br />323.4HP, 336.5TQ<br />Lid, Filter, Cutout, all else stock :)<p>\"Let the modding begin!\"Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment