Tweet
if you want to do a turbo all you really "need" to do to the car is lower your compression ratio. the easiest way to do this is with a thicker head gasket. Since this would require you to take off the heads anyway you should go ahead and get them port an pollished. this and the turbo will give you at lest 270hp possibly more. then later on your can decide on the right cam for the turbo (NA cams arent the best choice for turbos most of the time). as for looks... im not huge on aftermarket looks but basically that is whatever floats your boat. good luck and happy modding.
-
2001 Arctic White Firebird With Black Drop Top<br /><br />3:42 Gears<br />Zexel LSD<br />BMR upper A-Arms<br />Trans Am exhaust with 3\" I-pipe and cutout<br />Modified intake<br />Mecham Hood<br />Trans Go shift kit<br />Making rear control arms and panhard -
new cam kit
corvette air intake
rear disc conversion
rebuilding the engine to allow for turbo
headers
Flowmaster exhaust
Pop up headlights (ahaha, father daughter project)
-thats alot of cash you're "planning" on spending-Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment