Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ok I am having a problem with my oil pressure. When it starts out, according to the gauge, its at like 90 PSI, way over, then it gets down to 60, and then everytime I brake it goes down to 30 and then back to 60 when I accelerate. Then the other day when I got out of my car my girlfriend told me it smelled really bad and my car was dripping something and sure enough it was oil. A friend of mine had this same problem on his Explorer and it was his Oil Sending Unit, does this sound right or is it something else. Any help is appreciated. Thanks guys.
Alex
1996 Camaro RS A4<br />Flowmaster 80 Series Muffler with 2.5\" catback and cutout, SLP CAI, BMR STB
Higher oil pressures when starting are normal. The oil is a lot thicker when cold (even with a multi-viscosity oil) and will cause elevated pressures until it warms up. Even when warm, you will see higher pressures at higher RPMs. Similarly, once the oil is warm, when you slow down pressures may drop and then stabilize. As long as the pressure doesn't stay abnormally high or low, you are probably fine (from a pressure standpoint). Obviously, if you are dripping oil, you have a leak somewhere. That won't effect pressure unless it is severe enough that you lose all your oil, or unless it is in the pressured portion of the system (which the sending unit is). However, a pressure leak won't cause elevated pressures, it will cause lower pressures. What you need to do is trace the drip back and see exactly where it is coming from. It could be a sending unit, but that is a lot less likely than a leaking gasket or seal.
<b>Mike</b><br /><a href=\"http://www.cardomain.com/id/mcjoslyn\" target=\"_blank\">2001 Camaro</a><br />Light Pewter Metallic Convertible<br />AU0,A31,C60,DG7,F41,GU6,K34,L36,M30,T82,T96,UN0<p ><b>If it can\'t be expressed in figures, it is not science; it is opinion.</b>
yes, it's the sending unit, same thing happened to me. Gauge would read off the charts when I first start it and unless it was past 1000 rpm. Replaced the unit and it works fine now.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment