Tweet
I have a question about a sensor I broke on my 3.4. The sensor is towards the top and front of the block right above the motor mount and is round. I think its either a knock or temp sensor it has a green wire. The wire pulled out of the connector and I'm unsure if it will work by slipping the wire back in b/c theres a rubber gromment around where the wire goes. If it helps I can take a pic, let me know. Thanks!
-
Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come.... -
sounds like the intake air temp sensor...those wires pull right out so i dont think you broke it..they kinda plug back in...but im not sure which way..sorry i cant help you any more<b>12 SECOND DUAL STAGE DRY NITROUS POWERED 98 A4 V6 CAMARO<br /><a href=\"http://www.mysickcamaro.50megs.com\" target=\"_blank\">www.MySickCamaro.50megs.com</a><br />Best ET: 12.82@103<br />Best MPH: 104.7<br />Best 60\': 1.75 - Stock TC</b><br /> </font><blockquote><font size=\"1\" face=\"Verdana, Helvetica, sans-serif\">quote:</font><hr /><font size=\"2\" face=\"Verdana, Helvetica, sans-serif\">Originally posted by Shodown:<br /><strong>1DV6 runs 12\'s...enough said. </strong></font><hr /></blockquote><font size=\"2\" face=\"Verdana, Helvetica, sans-serif\"> -
Since when is the IAT sensor by the motor mount. It sounds like a knock sensor to me, I seem to remember taking that one out to drain the coolant from the block.Originally posted by 1DangerousV6:
sounds like the intake air temp sensor...those wires pull right out so i dont think you broke it..they kinda plug back in...but im not sure which way..sorry i cant help you any more<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
^^^uncalled for..i was trying to help if i could<b>12 SECOND DUAL STAGE DRY NITROUS POWERED 98 A4 V6 CAMARO<br /><a href=\"http://www.mysickcamaro.50megs.com\" target=\"_blank\">www.MySickCamaro.50megs.com</a><br />Best ET: 12.82@103<br />Best MPH: 104.7<br />Best 60\': 1.75 - Stock TC</b><br /> </font><blockquote><font size=\"1\" face=\"Verdana, Helvetica, sans-serif\">quote:</font><hr /><font size=\"2\" face=\"Verdana, Helvetica, sans-serif\">Originally posted by Shodown:<br /><strong>1DV6 runs 12\'s...enough said. </strong></font><hr /></blockquote><font size=\"2\" face=\"Verdana, Helvetica, sans-serif\">Comment
-
Knock sensor is on the passenger side under the exhaust manifold. It has a dark-blue wire.
3x crankshaft position sensor is also on the passenger side, below the knock sensor. It has yellow and purple wires.
24x crankshaft position sensor is on the front engine cover and has pink, pink/black and light-blue/white wires.
MAP sensor has a light-green wire + black and gray, but it's on the intake, not the block.
ECT has yellow and black/pink wires.
I think a picture would help.1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a>Comment
-
Ok the pictures are on page 6 which I call the "Opps" Page. I shoddered the sensor wire back on and taped it so it holds. Hopefully it wasn't a very important sensor. If anyone knows what it actually is let me know. You think I could get a replacement with the wire already in it so all I have to do is cut the old one off and shodder the new on???
NOTE: The pictures kinda suck. IF you can't tell the wire for the sensor is Blue/Gray
[ October 21, 2004, 12:43 AM: Message edited by: White95 ]Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come....Comment
-
I don't know anything about 3.4s, but that sure looks like a Knock Sensor on my car.Matt
1998 Mystic Teal Camaro M5
Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.Comment
-
Its called misinformation....and lack of knowledge.Originally posted by 1DangerousV6:
^^^uncalled for..i was trying to help if i could<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my websiteComment
-
That's the passenger-side bank correct?
If so, it's definitely the knock sensor. According to Haynes it should have a single dark-blue wire. Knock sensor on the 3.4 as stated previously is below the exhaust manifold on the right side of the motor.1994 Firebird 3.4<br />15.65 @ 86.8<br /><a href=\"http://www.funkz.net/firebird.htm\" target=\"_blank\">funkz.net/firebird</a><br /><a href=\"http://mywebpages.comcast.net/funkz/timeslips.htm\" target=\"_blank\">Timeslips</a>Comment
-
Ok well lets hope the sodder holds and I don't have to screw with it....Does anyone know if I buy a new sensor from somewhere will it come with just the sensor or a wire attached to the sensor??
Feel free to vote on my poll. There are some rich kids who think they'll "Kick my a$$" when I'm finished with my project. So if people start voting for me maybe they'll realize they're wrong.
[ October 21, 2004, 01:56 AM: Message edited by: White95 ]Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come....Comment
-
[img]graemlins/slap.gif[/img] [img]graemlins/slap.gif[/img] [img]graemlins/twak.gif[/img] [img]graemlins/twak.gif[/img]Originally posted by White95:
Ok well lets hope the sodder holds and I don't have to screw with it....Does anyone know if I buy a new sensor from somewhere will it come with just the sensor or a wire attached to the sensor??
Feel free to vote on my poll. There are some rich kids who think they'll "Kick my a$$" when I'm finished with my project. So if people start voting for me maybe they'll realize they're wrong.
thanks for the trojan, the virus is ***** to delete!!!!!!!!!!!!!!! :mad:www.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
-
do i really have a virus??Ben<br /><br />1995 White/Black 3.4L<br />As far away from stock as possible<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=288292\" target=\"_blank\">My Site!!!</a><br /><a href=\"http://www.redlinevsix.com\" target=\"_blank\">RedLineV6</a><br />Rebuild and 3.4 T70 Turbo is complete<br />Details to come....Comment
-
A new knock sensor will come with just the sensor, not the wiring harness. You can get the harness at a dealer or at and AutoElectric if you all have them locally.- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>Comment
-
yeah every time i vist your page, Mcafee kicked its *** but i get it everytimeOriginally posted by White95:
do i really have a virus??
i sent you email about it
http://us.mcafee.com/virusInfo/defau...virus_k=128461www.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
Comment
-
you can get a new connector "pigtail" from the dealer or somone that carries Standerd Motor Products parts line. Make sure that when you connect the new pigtail you use wire to wire connection and not any form of butt connector or your resistence valve will change.1996 Silver camaro Z28. M6,<br />12 bolt, 4.11\'s, posi, Rear cover, Spec stage 2, loudmouth, more <a href=\"http://home.mainstreamtopics.com/?index=3&module=1\" target=\"_blank\">http://home.mainstreamtopics.com/?index=3&module=1</a> <Mods, Pics & more <a href=\"http://home.mainstreamtopics.com/?index=3&module=2\" target=\"_blank\">http://home.mainstreamtopics.com/?index=3&module=2</a> <Fbody Tech ArticalsComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment