Turn signal switch question...

[MDfirebirdb]

My turn signals no longer work, although the flashers still work. Everything else checks out (bulbs, etc.) so I am going to assume it is the signal stalk (and inside switch) that has failed. Has anyone replaced this? Do I need to remove the steering wheel to access it? Thanks for any help.

[Pagan]

before you do this, have you switched out the flasher relay under the dash? you cant visually check this. I have had two short out on me in two years.

[HBHRacing]

what is the indicator doing? staying solid and not flashing? generaly a switch failure will result in no bulb activity on one side or the other. a bad flasher will result in the bulb lighting up but not blinking. Turn signal faults are rare.

[MDfirebirdb]

No, it is not staying solid or flashing on one side, it is simply not working period. They only work when the emergency/caution flasher switch is pulled.

I have not checked the relay under the dash though, were exactly is it located?

[HBHRacing]

the hazerds are on a seperate circut. Check the Turn/Back up fuse..