160 thermostat question? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

160 thermostat question?

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 160 thermostat question?

    my car feels like its dying in this heat.. its runnin in traffic around 210!!

    will a 16o thermostat help me out...?? and do they sell Hypertech thermostats at chains like pep boys??

    im also doin a home made slp fan switch for 12 bucks... i kno its going to throw codes but does it throw codes on the real slp verson?


    and i was looking into the harwood ram air hood but just using it to vent out all the heat under my hood since i already have a slp cai.... i got a few dents in my hood so instrad of pulling them i mite as well go with a new one..

  • #2
    i got a 160 in mine.... it doenst help while sitting in traffic..... but while moving it does..... it never goes above the first mark if im going 40+

    Comment


    • #3
      Does the ses light go off with a 160 stat?
      2002 Pewter Camaro SS M6/Hurst<br />345 HP SLP Performance Package<br />BMR STB, K&N, Lou\'s Short Stick, SSRA, ASP Pulley, SLP SFC\'s<br /><br />DYNO 8/18/04 STOCK: 326.43rwhp/342.44tq<br /><a href=\"http://www.cardomain.com/ride/530894/\" target=\"_blank\">My Car</a>

      Comment


      • #4
        On pre 2000 F-bodies the 160 thermo and fan switch should not cause an SES light.
        2001 Camaro M5 Coupe(1 of 2,737), no options, Whisper Lid, K&N Air Filter, Free Ram Air, MAFS Screen removed, SLP Manual Fan Switch, 160 thermo, DEE\'s T/B Spacer, EGR Block-off plate, IAT resistor, CAI to EGR air feed, B&M Ripper Shifter, SLP Replacement Grill, T/A Exhaust, SLP five spoke take-off wheels, BMR strut-tower brace, BMR Tunnel Brace, BMR 32/21 front & rear sway bars with poly, BMR Poly/Combo Rear Control Arms, Clear front & rear corners, HPP3 modified 87 Octane program.<p><a href=\"http://www.cardomain.com/id/red2k1\" target=\"_blank\">http://www.cardomain.com/id/red2k1</a>

        Comment


        • #5
          well can someone give a link for wiring diagram, etc for the manual fan switch... im gonna do that too...
          thanx
          john
          1998 Silver T-Tops Camaro, 3.8 5 Speed<br />Mods: VFN Fiberglass Stingray Hood, Whisper Lid, Free ram air mod, 3\" I-Pipe to Flowmaster 80 to dual 3\" Hooker dual tips, 160 degree thermo...too much to list <a href=\"http://www.cardomain.com/memberpage/683461\" target=\"_blank\">http://www.cardomain.com/memberpage/683461</a>

          Comment


          • #6
            <blockquote>quote:</font><hr>Originally posted by Red2K1:
            On pre 2000 F-bodies the 160 thermo and fan switch should not cause an SES light.<hr></blockquote>

            What about the 2000+ ones?
            <b>2002 Pewter v6 Camaro</b><br />T-tops, Auto, stock GFX<br />mods: SSRA, Whisper lid, K&N filter, Borla cat-back, Pioneer HU, RF 6.5\" speakers, billet grill, clear corners, red tubing under hood, black CAMARO fill-in\'s, QTEC, GM power antenna, fan switch

            Comment


            • #7
              I know Dominic and a few others run a resistor in place of the IAT to get rid of the SES light.

              http://www.camarov6.com/cgi-bin/ulti...c&f=1&t=007993
              - <a href=\"http://www.thenebula.com/carpics/pics2/camaro2.JPG\" target=\"_blank\">White \'99 V6 Camaro</a> (M5, 3.23s)<br />- 3\" Borla Exaust, RK Sport Induction Lid, Fast Toys Ram Air, K&N Air Filter, !Silencer, !MAF Screen, B&M Short shifter, Manual Fan Switch, 160° Hypertech Powerstat, BMR Boxed LCAs(rubber/poly), BMR STB<br /><a href=\"http://www.cardomain.com/member_pages/view_page.pl?page_id=386884&page=1\" target=\"_blank\">*My Cardomain Website*</a>

              Comment


              • #8
                <blockquote>quote:</font><hr>Originally posted by V6MaroFL:
                I know Dominic and a few others run a resistor in place of the IAT to get rid of the SES light.

                http://www.camarov6.com/cgi-bin/ulti...c&f=1&t=007993
                <hr></blockquote>


                Yep, and Ive got spare resistors if you want one. Let me know.
                2002 5-spd NBM Camaro
                Details: www.1lev6.com

                Comment


                • #9
                  I did my 180 thermo today.. that was one easy mod..

                  Hopefully it will richen me back up a little.. cause i got leaned out a little when i did the rocker arms..

                  the dam temp guage still hasent bugged though??

                  I hear some LS1's have this problem also..
                  any thoughts?

                  ~BIll

                  [ July 23, 2003: Message edited by: AllTheGoodNamesAreGone ]</p>

                  Comment


                  • #10
                    <blockquote>quote:</font><hr>Originally posted by AllTheGoodNamesAreGone:
                    I did my 180 thermo today.. that was one easy mod..

                    Hopefully it will richen me back up a little.. cause i got leaned out a little when i did the rocker arms..

                    the dam temp guage still hasent bugged though??

                    I hear some LS1's have this problem also..
                    any thoughts?

                    ~BIll

                    [ July 23, 2003: Message edited by: AllTheGoodNamesAreGone ]
                    <hr></blockquote>


                    And it wont budge with a 180.
                    2002 5-spd NBM Camaro
                    Details: www.1lev6.com

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X