Was reading on another board, from my area, Seafoam has been discussed alot lately, seems it has become the hot **** for cleaning the motor. Well, yes it does do a good job, and it will clean a severely dirty motor, but it has been found by a few people to cause a serious problem if used regularly, or especially on a cleaner motor.
One of the guys on this board is GM service writer, and he posted that a kid had taken his car to the dealership because it was running rough. After diagnosing the situation the techs had found 2 small holes developed in the pistons. the car was stock and the kid had told them that the only thing he does is change the oil and seafoam every 3000 miles.
To make a long story short, seafoam cleans the chambers by creating a hotter combustion and also has a chemical to eat away the carbon, well if there is no carbon to clean it just burns real hot, creating a "leanlike" condition and in turn starts to get hotspots, which can cause the holes to form.
So watch how much you do it, or you could be slowly degrading the pistons and combustion chambers. Not saying this will happen to you, but when a Tech says somthing like this, it may be somthing to not shrug off...
One of the guys on this board is GM service writer, and he posted that a kid had taken his car to the dealership because it was running rough. After diagnosing the situation the techs had found 2 small holes developed in the pistons. the car was stock and the kid had told them that the only thing he does is change the oil and seafoam every 3000 miles.
To make a long story short, seafoam cleans the chambers by creating a hotter combustion and also has a chemical to eat away the carbon, well if there is no carbon to clean it just burns real hot, creating a "leanlike" condition and in turn starts to get hotspots, which can cause the holes to form.
So watch how much you do it, or you could be slowly degrading the pistons and combustion chambers. Not saying this will happen to you, but when a Tech says somthing like this, it may be somthing to not shrug off...
Comment