JB Weld?

[1DangerousV6]

can someone please tell me exactly what JB weld is..where i get it..and how it could be use to close up a hole on the TB from an old nitrous fan nozzle?..thanks

[1DangerousV6]

also..it looks like theres 2 kinds..one that bonds in 4 minutes..and one that bonds in 4 - 6 hours..which one do i want??..here are the two part numbers:

4 minutes: 6-8276.JB
4 - 6 hours: 6-8265-S.JB

[HeadyFirebird'00]

go to wal mart or napa. anywhere has it. its pretty cool stuff. follow the directions exactly and it wrks like a... something good

[ssms5411]

I would let it set for about 12- 24 hours. The stuff works good after it drys.

[1DangerousV6]

awesome..i'll probably just put it in on a weekend and let it sit over-night into the next day..thanks!

[grayman]

NOt sure what you are plugging...but if you could tap a plug in there as well...rather than just a wad of glue things might be better/stronger.

If so...directions on JB weld will be something like..."epoxy both surfaces...let set up a bit...and then mate the two surfaces" if I remember right.

but jbweld instructions tell you exactly.

Good luck with the reworked powerplant.

sounds like you got the body damage all fixed up?

[RallyRed 98]

i don't think he's trying to bond anything, just plug a hole... works just like body filler in that capacity.

[Savage_Messiah]

I think he's trying to close up a hole on the TB from an old nitrous fan nozzle

;)

[dorkins]

Originally posted by Savage_Messiah:
I think he's trying to close up a hole on the TB from an old nitrous fan nozzle

;)

doubt it...
heh
but, u mix the 2 together, 1:1 ratio, and smear it on there... works great

[F1GT]

Originally posted by 1DangerousV6:
can someone please tell me exactly what JB weld is..

What?? You mean you dont have a tube of it next your duct tape??? :D

[Savage_Messiah]

Originally posted by dorkins:
</font><blockquote>quote:</font><hr />Originally posted by Savage_Messiah:
I think he's trying to close up a hole on the TB from an old nitrous fan nozzle

;)

doubt it...
heh
but, u mix the 2 together, 1:1 ratio, and smear it on there... works great </font>[/QUOTE]

can someone please tell me exactly what JB weld is..where i get it.. and how it could be use to close up a hole on the TB from an old nitrous fan nozzle?..thanks

[F1GT]

SAVAGE MESSIAH:
You didn't have to post and bold it. He was just kidding. That is where the "heh" came in. ;)

[andrew.brandon]

Originally posted by F1GT:
SAVAGE MESSIAH:
You didn't have to post and bold it. He was just kidding. That is where the "heh" came in. ;)

but it did add a nice touch to it......... ;)


hmmm so JB weld is a glue like thingy for fixing stuff, see I learn something here everyday

[FireFighter]

JB weld is more than a glue, its very very strong for the couple bucks it costs. You can get it a auto zone, advanced auto, napa, wal mart a lot of places.