Tweet
have any of yall bored out your engine? if so how much, and what all do you need beforehand? i know that i would need new pistons, but how much can those cost? I have a good friend of mine (hes 27) and he worked for a performance shop and did that kind of work, and hes offering to do it, as long as i can get all the stuff needed beforehand
-
2000 Navy Blue T-top Camaro A4<br />TSP Rumbler <br />Carsound Hi-flo Cat<br />!MAF screen<br />Whisper lid<br />HPP3 -
youhave to fully rebiuld the motor, and for our motor the gains to keeking is stock would be like not worth it. if you have a 3.8 check my web page
mine is 3.82 BTWwww.turbov6camaro.com
1997 3800 Series II Camaro
4600 Stall for my ride to the mall :chug:
7.18 @ 99.77 1/8 -1.8x sixty (current quickest v6 fbod)
11.23 @ unk 5 1/4 - 7.19 1/8 - 1.83 sixty
-
If you are looking to add more cubes to your engine, a stroker kit would not only add more cubes than the maximum bore you could do, but it would also be cheaper and easier.2001 Black Z28 M6<br />Sprayed, slotted, geared and more~Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment