does anyone have problems with there driver side window?

[blackbyrd]

ive already replace the motor once but its doing the same thing again its gets really slugish and then it just eventually quits and last night in 30 degree cold it quit so i had a 15 minute drive on interstate with the window down is something besides the motor for the window that maybe i could fix or do i have to take it back to the dealer to let them look at it?

[CAMAROWITHBASS]

my guess would be that its your window switch.

[blackbyrd]

any other suggestions not that i dont belive you just want to get all the know

[sped214]

Check your door. if the door isn't adjusted correctly, the window motor may be having to work too hard to roll the window up, causing premature burnout of the motor. Just a suggestion...

[blackbyrd]

ok waht exactly do i look at to check the door?

[magic1872]

I am!!!! I will get really sluggish, and eventually stop. I wait a few minutes and then if rolls up a little bit. It take me about 10 minutes to get the whole thing rolled up.

[blackbyrd]

is there a hidden joke in that if so i feel sorry for you. haven to roll al that stuff up. i got a good idear for you could stick up your @$$ lol

hahahaha that was a good one just kidding. nice sense of humor

[nikon]

yup same with me..Ive had both sides replaced...and the driver side brought in twice...the second time they just greased it up and it worked alot better...but this was after the motor was being strained....so bring it to the dealer..get the motor replaced...have em grease it up good...and depending on how much you roll your window up and down...grease the window track up...it's a b*tch to get the side panel on and off at first, but once you get used to it theres nothin to it...keeps mine workin good.....mine stayed down in a nice big downpour about 6 months ago :mad: :mad:

[Fusion]

My passenger side window is slowly starting to get sluggish. O no can't be good. Hopefully it will speed back up or something. It takes forever to go down when I am pressing both windows to go down or up.

[stagen]

<blockquote>quote:</font><hr>Originally posted by Fusion:
My passenger side window is slowly starting to get sluggish. O no can't be good. Hopefully it will speed back up or something. It takes forever to go down when I am pressing both windows to go down or up.<hr></blockquote>

Your motor is going out. This is typical behavior of a motor going bad. Mine did that for about a year before it finally went out. I didn't bother with it casue it was the passengers side.

As far as the other person, if you don't want to take it in for repair, spray some silicone spray over the large gear the motors turns and then grease it back up.

[John_D.]

This weekend I removed the window tint on another car, and there is just a little bit of a gummy coating left on the window, and it makes the window drag against the inner weatherstrip.

I washed, and scraped, and washed and scraped some more, but it is still dragging.

I'm going to try to silicone spray the inner edge of the weatherstrip seal and see if that helps any.

It is so slow now, and it was fine before I took the tint off. You don't really even feel the gummy coating on the window with your hand anymore (you can't tell that it used to have tint and was taken off), but it still drags anyway.

[blackbyrd]

sped214

what do i lok at to check to see if the door isnt adjusted correctly?

[Loochy88]

a couple months ago i was driving around and my drivers side motor died for a few min. it wouldnt roll up for anything. finally i got it working (no idea how) and its been fine since.

[ November 06, 2002: Message edited by: Loochy88 ]</p>