Tweet
i bought a pcv valve yesterday to replace on my car (prolly the first time it's ever been done). but i'm wondering what's involved in this and what tools i may need? thx.
-
2000 NBM M6 Camaro Z28<br />323/335 -
I believe one set of hands complete with 5 fingers each will do the job nicely. At least thats what mine took. [img]smile.gif[/img] -
nice timing [img]smile.gif[/img] I just did this yesterday for the first time, you need a 10mm socket and some needlenose pliers. The valve is located just to the left of the 3800 Series II that is on the engine, its a small black cap-looking thing, just take off the 2 bolts, remove the spring under it, then use the pliers to take out the PCV valve. Its held in by an O-ring, becareful not to lose that if it comes out. just replace in opposite order, easy easy easy, took me 10-15 min, and that was with a hot engine(not recomended:-P) have fun.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment